Pharmacologically Induced Accommodation Palsy and the Bioelectrical Activity of the Muscular System: A Preliminary Investigation.

The aim of this study was to pharmacologically induce accommodative paralysis and evaluate its effects on the bioelectrical activity of the muscular system. The study included two participant groups: those with myopia and those with normal vision (emmetropes). Electromyographic assessments were performed using the Noraxon Ultium DTS 8-K MR 3 myo Muscle Master Edition system. The muscles analyzed in this study were the temporalis, masseter, sternocleidomastoid, trapezius, abdominal muscles, biceps brachii, and the external oblique muscles of the abdomen. It is important to acknowledge that, based on the current findings, it cannot be definitively stated that the observed effects have clinical significance, and additional studies are encouraged.

A Meta-Analysis of the Global Prevalence of Temporomandibular Disorders.

Background: This meta-analysis aims to evaluate the proportion of people with TMDs in different studies, considering factors such as geographical region, patient age, and sample size. Methods: The search yielded 6984 articles on the incidence of TMDs. Finally, 74 studies with 172,239 subjects and 35,259 with TMDs were selected for final analysis. Analyses were performed using the R statistical language. Results: The incidence of TMDs in the world population was 34%. The age group 18-60 years is the most exposed to TMDs. From the data presented, we observed that for each continent, the female group was 9% to 56% larger than the male group. The highest female-to-male ratio (F:M) was reported in South America (1.56), whereas the lowest F:M ratio was reported in Europe (1.09), suggesting an almost equal distribution of males and females. Conclusions: This suggests that geographical location may play a role in the results of the studies. The prevalence of TMDs was significantly higher in South America (47%) compared to Asia (33%) and Europe (29%). Larger epidemiological studies of TMDs in African and Australian populations are recommended. In conclusion, both visual and statistical assessments suggest that the results of our meta-analysis are robust and unlikely to be significantly affected by publication bias. This suggests that geographical location may play a role in the prevalence of TMDs.

Sugars induced exfoliation of porous graphitic carbon nitride for efficient hydrogen evolution in photocatalytic water-splitting reaction.

Photocatalytic hydrogen evolution holds great promise for addressing critical energy and environmental challenges, making it an important area in scientific research. One of the most popular photocatalysts is graphitic carbon nitride (gCN), which has emerged as a noteworthy candidate for hydrogen generation through water splitting. However, ongoing research aims to enhance its properties for practical applications. Herein, we introduce a green approach for the fabrication of porous few-layered gCN with surface modifications (such as oxygen doping, carbon deposition, nitrogen defects) with promoted performance in the hydrogen evolution reaction. The fabrication process involves a one-step solvothermal treatment of bulk graphitic carbon nitride (bulk-gCN) in the presence of different sugars (glucose, sucrose, and fructose). Interestingly, the conducted time-dependent process revealed that porous gCN exfoliated in the presence of fructose at 180 °C for 6 h (fructose_6h) exhibits a remarkable 13-fold promotion of photocatalytic hydrogen evolution compared to bulk-gCN. The studied materials were extensively characterized by microscopic and spectroscopic techniques, allowing us to propose a reaction mechanism for hydrogen evolution during water-splitting over fructose_6h. Furthermore, the study highlights the potential of employing a facile and environmentally friendly fructose-assisted solvothermal process to improve the efficiency and stability of catalysts based on graphitic carbon nitride.

Organic LEDs Based on Bis(8-hydroxyquinoline) Zinc Derivatives with a Styryl Group.

For the first time, organic light-emitting diodes (OLEDs) based on bis(8-hydroxyquinoline) zinc with a styryl group (ZnStq) dispersed in poly(N-vinylcarbazole) matrix (ZnStq_R:PVK, where R = H, Cl, OCH3) were fabricated. The ZnStq_R:PVK films made via the spin-coating method were used as the active layer in these devices. The produced OLEDs showed strong electroluminescence with yellow emissions at 590, 587 and 578 nm for the ZnStq_H:PVK, ZnStq_Cl:PVK and ZnStq_OCH3:PVK, respectively. For all the studied thin films, the main photoluminescence emission bands were observed between 565 and 571 nm. The OLED with the ZnStq_OCH3:PVK layer with a narrow electroluminescence spectrum was found to have sufficient color purity to produce ultra-high-resolution displays with reduced power consumption (full width at half maximum of 59 nm, maximum brightness of 2244 cd/m2 and maximum current efficiency of 1.24 cd/A, with a turn-on voltage of 6.94 V and a threshold voltage of 7.35 V). To characterize the photophysical properties of the active layer, the ZnStq_R:PVK layers samples were additionally deposited on glass and silicon substrates. We found that the obtained results predestine ZnStq_R:PVK layers for use in the lighting industry in the future.

Ti3C2 MXenes-based catalysts for the process of α-pinene isomerization.

In this study, the catalytic performance of Ti3C2 MXene materials in the reaction of α-pinene isomerization was demonstrated. The influence of etching agents (HF, HF/H2SO4, and HF/HCl; weight ratios of mixed acids: 1 : 3, 1 : 4, and 1 : 5) on removing Al atoms from MAX phase, creation of an accordion-like structure typical for MXenes and catalytic activity of the produced samples have been revealed. The MXene HF obtained by MAX phase HF treatment exhibited the highest activity (conversion of α-pinene 74.65 mol%), while materials produced with the mixed acids (HF/H2SO4 and HF/HCl) showed a significant reduction in the conversion of α-pinene (on average about 28-fold). However, these last samples displayed an increase of about 10 mol% in the selectivity to the most desirable product-camphene. The high activity of MXene HF is a result of a high concentration of acid sites (11.62 mmol g-1) - the concentration of acid sites in the samples obtained by MAX phase mixed acids treatment was about 2.5-5.5 times smaller. This work proposes possible mechanisms for the α-pinene isomerization reaction on the MXene HF and on the MXene HF/H2SO4X : Y and MXene HF/HCl X : Y in connection with their structure.

Influence of P3HT:PCBM Ratio on Thermal and Transport Properties of Bulk Heterojunction Solar Cells.

The influence of P3HT:PCBM ratio on thermal and transport properties of solar cells were determined by photothermal beam deflection spectrometry, which is advantageous tool for non-destructively study of bulk heterojunction layers of organic solar cells. P3HT:PCBM layers of different P3HT:PCBM ratios were deposited on top of PEDOT:PSS/ITO layers which were included in organic bulk-heterojunction solar cells. The thermal diffusivity, energy gap and charge carrier lifetime were measured at different illumination conditions and with a different P3HT:PCBM ratios. As expected, it was found that the energy band gap depends on the P3HT:PCBM ratio. Thermal diffusivity is decreasing, while charge carrier lifetime is increasing with PCBM concentration. Energy band gap was found to be independent on illumination intensity, while thermal diffusivity was increasing and carrier lifetime was decreasing with illumination intensity. The carrier lifetime exhibits qualitatively similar dependence on the PCBM concentration when compared to the open-circuit voltage of operating solar cells under AM1.5 illumination. BDS and standard I-V measurement yielded comparable results arguing that the former is suitable for characterization of organic solar cells.

Facile Strategy for Boosting of Inorganic Fillers Retention in Paper.

Achieving the desired properties of paper such as strength, durability, and printability remains challenging. Paper mills employ calcium carbonate (CaCO3) as a filler to boost paper's brightness, opacity, and printability. However, weak interaction between cellulose fibers and CaCO3 particles creates different issues in the papermaking industry. Therefore, this study explores the influence of various inorganic additives as crosslinkers such as mesoporous SiO2 nanospheres, TiO2 nanoparticles, h-BN nanoflakes, and hydroxylated h-BN nanoflakes (h-BN-OH) on inorganic fillers content in the paper. They were introduced to the paper pulp in the form of a polyethylene glycol (PEG) suspension to enable bonding between the inorganic particles and the paper pulp. Our findings have been revealed based on detailed microscopic and structural analyses, e.g., transmission and scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and N2 adsorption/desorption isotherms. Finally, the inorganic fillers (CaCO3 and respective inorganic additives) content was evaluated following ISO 1762:2001 guidelines. Conducted evaluations allowed us to identify the most efficient crosslinker (SiO2 nanoparticles) in terms of inorganic filler retention. Paper sheets modified with SiO2 enhance the retention of the fillers by ~12.1%. Therefore, we believe these findings offer valuable insights for enhancing the papermaking process toward boosting the quality of the resulting paper.

Bioactive Carboxymethyl Cellulose (CMC)-Based Films Modified with Melanin and Silver Nanoparticles (AgNPs)-The Effect of the Degree of CMC Substitution on the In Situ Synthesis of AgNPs and Films' Functional Properties.

Green synthesis of nanoparticles for use in food packaging or biomedical applications is attracting increasing interest. In this study, the effect of the degree of substitution (0.7, 0.9 and 1.2) of a carboxymethylcellulose polymer matrix on the synthesis and properties of silver nanoparticles using melanin as a reductant was investigated. For this purpose, the mechanical, UV-Vis barrier, crystallinity, morphology, antioxidant and antimicrobial properties of the films were determined, as well as the color and changes in chemical bonds. The degree of substitution effected noticeable changes in the color of the films (the L* parameter was 2.87 ± 0.76, 5.59 ± 1.30 and 13.45 ± 1.11 for CMC 0.7 + Ag, CMC 0.9 + Ag and CMC 1.2 + Ag samples, respectively), the UV-Vis barrier properties (the transmittance at 280 nm was 4.51 ± 0.58, 7.65 ± 0.84 and 7.98 ± 0.75 for CMC 0.7 + Ag, CMC 0.9 + Ag and CMC 1.2 + Ag, respectively) or the antimicrobial properties of the films (the higher the degree of substitution, the better the antimicrobial properties of the silver nanoparticle-modified films). The differences in the properties of films with silver nanoparticles synthesized in situ might be linked to the increasing dispersion of silver nanoparticles as the degree of CMC substitution increases. Potentially, such films could be used in food packaging or biomedical applications.

Effect of 2-Methylthiazole Group on Photoinduced Birefringence of Thiazole-Azo Dye Host-Guest Systems at Different Wavelengths of Irradiation.

The photoinduced birefringence behaviors of host-guest systems based on heterocyclic thiazole-azo dyes with different substituents, dispersed into PMMA matrix, were investigated under three excitation wavelengths, i.e., 405 nm, 445 nm or 532 nm. The wavelengths fell on the blue side, near the maximum or on the red side of the absorption bands of trans-azo dyes, respectively. We found that photoinduced birefringence was generated at a similar extent in all studied systems, except the system containing a 2-methyl-5-benzothiazolyl as thiazole-azo dye substituent. For this material, the achieved birefringence value was the highest among the whole series, regardless of the excitation wavelength. Moreover, we identified the optimal irradiation wavelength for efficient birefringence generation and showed that large absorption of excitation light by trans isomer does not account for achieving a significant degree of molecular alignment. The obtained results indicate that thiazole-azo dye with a 2-methyl-5-benzothiazolyl substituent shows promising photoinduced birefringence, and can be considered a dye potentially suitable for optical applications.

Spectroscopic Studies of Styrylquinoline Copolymers with Different Substituents.

The aim of the study was to present the influence of various styrylquinoline (StQ) substituents on the luminescence, structural, and optical properties of StQ-containing copolymers. StQ-containing copolymers were synthesized by free-radical thermoinitiated polymerization. The calculations of the copolymerization ratios for the obtained copolymers were based on the basis of the integrated peak areas of the 1H NMR spectra in CDCl3. The luminescence measurements show that the change in the nature of the electron-donating and electron-withdrawing of the substituent shifts the emission band to longer wavelengths and causes a transition from blue fluorescence to green or yellow and orange (or even white), regardless of the electronic nature of the introduced substituent group. The structural properties were measured by Fourier-Transform Infrared (FTIR) and Raman spectroscopies. For all of the compounds, we observed similarities in the bands in FTIR and Raman measurements. The optical parameters were obtained from the absorbance measurements. Additionally, Scanning Electron Microscopy (SEM) was used to study the surface topography of the thin layers on the glass substrate. The SEM images confirm that we obtained smoother layers for two copolymers. The computational Density Functional Theory (DFT) analysis fully supports the beneficial features of the analyzed systems for their applications in optoelectronic devices. Based on the obtained results, it can be concluded that all of the studied styrylquinolines are promising materials for applications in organic light-emitting diodes (OLEDs). However, COP1 with an OCH3 donor substituent possess a wider luminescence band, and its layer is smoother and more transparent.

Influence of Heat Treatment on Surface, Structural and Optical Properties of Nickel and Copper Phthalocyanines Thin Films.

The work presents the effect of annealing on the change of polycrystalline α and ß phases of copper and nickel phthalocyanines. We have found that this process has a great influence on the optical properties of the vapor-deposited layers. The performed measurements showed that for various forms of MPc, the values of the refractive index and the extinction coefficient increased, and consequently, so did the absorption coefficient. The AFM images taken showed that the values before and after heating are morphologically different. Raman measurements showed that the band at about 1526 cm-1 (B1g symmetry) has higher intensity for the α form than for the ß form. The intensity of this band is related to changing the form of phthalocyanine from α to ß. Our measurements have shown that by changing the annealing temperature of the layers, we change their optical properties. As a consequence, we change their optoelectronic parameters, adjusting them to the requirements of new optoelectronic devices, such as solar cells, sensors, displays and OLEDs.

Silicone polyether surfactant enhances bacterial cellulose synthesis and water holding capacity.

The versatility and unique properties of bacterial cellulose (BC) motivate research into enhancing its synthesis. Here a silicone polyether surfactant (SPS) was synthesized and tested as a non-nutritional additive to the cultivation media of Komagataeibacter xylinus. The addition of SPS to the Hestrin-Schramm (HS) medium resulted in a concentration-dependent decrease in surface tension from 59.57 ± 0.37 mN/m to 30.05 ± 0.41 mN/m (for 0.1% addition) that was correlated with an increased yield of BC, up to 37% wet mass for surfactant concentration close to its critical micelle concentration (0.008%). Physicochemical characterization of bacterial cellulose obtained in presence of SPS, showed that surfactant is not incorporated into BC structure and has a moderate effect on its crystallinity, thermal stability. Moreover, the water holding capacity was enhanced by over 40%. Importantly, obtained BC did not affect L929 murine fibroblast cell viability. We conclude that SPS provides an eco-friendly approach to increasing BC yield in static culture, enabling more widespread industrial and biomedical applications.

Influence of Hydrogenation on Morphology, Chemical Structure and Photocatalytic Efficiency of Graphitic Carbon Nitride.

In this contribution, the effect of hydrogenation conditions atmosphere (temperature and time) on physicochemical properties and photocatalytic efficiency of graphitic carbon nitride (g-C3N4, gCN) was studied in great details. The changes in the morphology, chemical structure, optical and electrochemical properties were carefully investigated. Interestingly, the as-modified samples exhibited boosted photocatalytic degradation of Rhodamine B (RhB) with the assistance of visible light irradiation. Among modified gCN, the sample annealed at 500 °C for 4 h (500-4) in H2 atmosphere exhibited the highest photocatalytic activity-1.76 times higher compared to pristine gCN. Additionally, this sample presented high stability and durability after four cycles. It was noticed that treating gCN with hydrogen at elevated temperatures caused the creation of nitrogen vacancies on gCN surfaces acting as highly active sites enhancing the specific surface area and improving the mobility of photogenerated charge carriers leading to accelerating the photocatalytic activity. Therefore, it is believed that detailed optimization of thermal treatment in a hydrogen atmosphere is a facile approach to boost the photoactivity of gCN.

Influence of the Microstructure and Optical Constants on Plasmonic Properties of Copper Nanolayers.

Copper layers with thicknesses of 12, 25, and 35 nm were thermally evaporated on silicon substrates (Si(100)) with two different deposition rates 0.5 and 5.0 Å/s. The microstructure of produced coatings was studied using atomic force microscopy (AFM) and powder X-ray diffractometer (XRD). Ellipsometric measurements were used to determine the effective dielectric functions <ε˜> as well as the quality indicators of the localized surface plasmon (LSP) and the surface plasmon polariton (SPP). The composition and purity of the produced films were analysed using X-ray photoelectron spectroscopy (XPS).

Distance Effects of Phenylpiperazine-Containing Methacrylic Polymers on Optical and Structural Properties.

New materials based on methacrylic polymers modified with 1-(4-nitrophenyl)piperazine side chains, differing in the distance of the chromophore from the polymer main chain and/or the separation between the chromophoric units in the chain, are obtained and characterized in terms of their potential applications in optoelectronic devices. The surface, structural, and optical properties of the investigated materials are determined using atomic force microscopy, spectroscopic ellipsometry combined with transmission measurements, Raman and Fourier transform infrared spectroscopy, as well as cyclic voltammetry. The relevant model systems are additionally analyzed with quantum chemical density functional theory calculations in order to enable the generalization of the structure-photophysical property relationships for the optimization of the material features. It is found that the structural modification of the material, relying on the transit of the piperazine moiety away from the main polymer chain, leads to the hypsochromic shift of the absorption spectrum. Moreover, the lowest refractive index values are obtained for the polymer with a distant ethylene group in the side-chains and increased separation between the piperazine units. It was shown that the optical energy band gaps of the investigated piperazine-containing polymers are in the range from 2.73 to 2.81 eV, which reveals their promising potential for the advances in photovoltaics, field effect transistors, or electrochromic devices as an alternative for other widely applied polymer materials.

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride.

Chlorine is found to be a suitable element for the modification of polymeric carbon nitride properties towards an efficient visible-light photocatalytic activity. In this study, chlorine-doped polymeric carbon nitride (Cl-PCN) has been examined as a photocatalyst in the hydrogen evolution reaction. The following aspects were found to enhance the photocatalytic efficiency of Cl-PCN: (i) unique location of Cl atoms at the interlayers of PCN instead of on its π-conjugated planes, (ii) slight bandgap narrowing, (iii) lower recombination rate of the electron-hole pairs, (iv) improved photogenerated charge transport and separation, and (v) higher reducing ability of the photogenerated electrons. The above factors affected the 4.4-fold enhancement of the photocatalytic efficiency in hydrogen evolution in comparison to the pristine catalyst.

0D, 1D, 2D molybdenum disulfide functionalized by 2D polymeric carbon nitride for photocatalytic water splitting.

Photocatalytic activity of molybdenum disulfide structures with different dimensions (0D, 1D and 2D) functionalized with polymeric carbon nitride (PCN) is presented. MoS2nanotubes (1D), nanoflakes (2D) and quantum dots (0D, QDs) were used, respectively, as co-catalysts of PCN in photocatalytic water splitting reaction to evolve hydrogen. Although, 2D-PCN showed the highest light absorption in visible range and the most enhanced photocurrent response after irradiation with light from 460 to 727 nm, QDs-PCN showed the highest photocatalytic efficiency. The detailed analysis revealed that the superior photocatalytic activity of QDs-PCN in comparison with other structures of MoS2arose from (i) the most effective separation of photoexcited electron-hole pairs, (ii) the most enhanced up-converted photoluminescence (UCPL), (iii) the highest reactivity of electrons in conduction band. Moreover, a narrowed size of QDs affected shorter diffusion path of charge carriers to active reaction sites, higher number of the sites and higher interfacial area between molybdenum disulfide and PCN.

Synthesis and Characterization of Novel Hybrid Flocculants Based on Potato Starch Copolymers with Hollow Carbon Spheres.

Novel carbon nanofiller-based starch-g-polyacrylamide hybrid flocculation materials (St-PAM-CS) were in situ prepared using potato starch (St), acrylamide (AM), and hollow mesoporous carbon spheres (CSs; diameters of 300-400 nm). Structures of different St-PAM-CS systems were characterized by Fourier transform infrared (FTIR) spectroscopy, X-Ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), laser scanning microscopy (LSM), and particle size analysis. The flocculation tests were evaluated by removing high turbidity kaolin suspension-initial absorbance 1.84. The effect of the St to AM molar ratio, doses, and content of CSs in hybrids on flocculation efficiency were examined. Satisfactory flocculation efficiency was obtained for all hybrids with 1 wt.% of the CS component. The highest reduction of the kaolin suspension absorbance (to 0.06) was observed for a 3 mL dose of the starch hybrid with the highest AM content. Additionally, St-PAM-CS showed a reduction in the sludge volume in time. The hybrids reached better flocculation efficiency in relation to the reference systems without CSs. The proposed flocculation mechanism (considering bridging, patching, and formation of hydrogen bonds) has been confirmed by the recorded results.

Physico-Chemical and Light-Induced Properties of Quinoline Azo-dyes Polymers.

We present investigation of optical and photochromic properties as well as of surface quality of thin films of novel methacrylic polymers with 8-hydroxyquinoline azo-dyes in side-chain. Additionally, thermal stability of polymer powders was examined and their glass transition temperature was determined. Optical properties (extinction coefficient and refractive index) were determined by spectroscopic ellipsometry (SE) combined with absorbance measurements. Photoresponsive behavior was investigated by determination of photoisomerization rates under irradiation with unpolarized 365 nm light, as well as by conduction of holographic grating inscription experiment. Thin film quality was determined by atomic force microscopy (AFM) measurements. Thermal analysis was performed by thermogravimetric (TG), derivative thermogravimetric (DTG) and differential scanning calorimetry (DSC) measurements. We found that optical properties as well as photoisomerization rates of investigated polymers are dependent on the substituent in the para position of the phenyl ring. Surface relief grating inscription was successfully generated only for materials with chromophores containing dimethylamino (N(CH3)2) and methyl (CH3) substituents, but all materials exhibited birefringence grating in the bulk. Surface of most thin films was very smooth, but its quality was impaired by neutral (H) as well as carboxyl (COOH) substituent. Thermal stability of copolymers with side-chain chromophores was improved compared to pure poly(methyl methacrylate) (PMMA).

Synthesis, Optical, and Morphological Studies of ZnO Powders and Thin Films Fabricated by Wet Chemical Methods.

Zinc oxide nanoparticles were prepared from Zn5(CO3)2(OH)6 precursor, capped with poly(vinylpyrrolidone) (PVP), and annealed at 600 °C. The obtained powders were characterized by a powder X-ray diffraction (PXD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV-visible spectroscopy (UV-vis), Raman spectroscopy, infrared spectroscopy (IR), thermal analysis (TGA/DTA), and third-order nonlinear (NL) optical measurement. Morphological evaluation by TEM and SEM measurements indicated that the precursor micro-particles are ball-shaped structures composed of plates with a thickness of approximately 10 nm. ZnO thin films, as well as ZnO/polymer multilayer layouts, were obtained by wet chemical methods (spin- and dip-coating). Surface topography and morphology of the obtained films were studied by SEM and AFM microscopy. Films with uniformly distributed ZnO plates, due to the erosion of primary micro-particles were formed. The fabricated specimens were also analyzed using a spectroscopic ellipsometry in order to calculate dielectric function and film thickness.